Versions Compared

Version Old Version 1 New Version Current
Changes made by

Yutthana Wongnongwa

Yutthana Wongnongwa

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This article will guide you to run the Jupyter Notebook via Mamba on the LANTA HPC system, which requires ssh tunneling to the LANTA HPC. An overview of the content can be found in the table of contents below for immediate visualization of the interesting parts.

Table of Contents

Creating an environment to run the Jupyter Notebook

Load Mamba module

  1. Use the ml av Mamba command to see which version of Mamba is available on the LANTA HPC system.

  2. Use the ml Mamba/xx.xx.x command to load the Mamba version that you want to use. If you don't specify a version, the default version (D) is loaded, which is Mamba/23.11.0-0.

Code Block
username@lanta:~> ml av Mamba
---------------------- /lustrefs/disk/modules/easybuild/modules/all -----------------------
   Mamba/23.11.0-0 (D)

Use "module spider" to find all possible modules and extensions.
Use "module keyword key1 key2 ..." to search for all possible modules matching any of the "keys".
username@lanta:~> ml Mamba/23.11.0-0

Create the environment

  1. Use the conda create -n myenv python=3.9 commands to create the conda environment with myenv name and a specific version of python.

  2. Use the conda activate myenv to activate the myenv environment.

Code Block
username@lanta:~> conda create -n myenv python=3.9
Channels:
 - conda-forge
Platform: linux-64
Collecting package metadata (repodata.json): done
Solving environment: done

## Package Plan ##

  environment location: /your directory/envs/myenv

  added / updated specs:
    - python=3.9


The following packages will be downloaded:

    package                    |            build
    ---------------------------|-----------------
    python-3.9.19              |h0755675_0_cpython        22.7 MB  conda-forge
    wheel-0.43.0               |     pyhd8ed1ab_1          57 KB  conda-forge
    ------------------------------------------------------------
                                           Total:        22.8 MB

The following NEW packages will be INSTALLED:

  _libgcc_mutex      conda-forge/linux-64::_libgcc_mutex-0.1-conda_forge
  _openmp_mutex      conda-forge/linux-64::_openmp_mutex-4.5-2_gnu
  bzip2              conda-forge/linux-64::bzip2-1.0.8-hd590300_5
  ca-certificates    conda-forge/linux-64::ca-certificates-2024.2.2-hbcca054_0
  ld_impl_linux-64   conda-forge/linux-64::ld_impl_linux-64-2.40-h41732ed_0
  libffi             conda-forge/linux-64::libffi-3.4.2-h7f98852_5
  libgcc-ng          conda-forge/linux-64::libgcc-ng-13.2.0-h807b86a_5
  libgomp            conda-forge/linux-64::libgomp-13.2.0-h807b86a_5
  libnsl             conda-forge/linux-64::libnsl-2.0.1-hd590300_0
  libsqlite          conda-forge/linux-64::libsqlite-3.45.2-h2797004_0
  libuuid            conda-forge/linux-64::libuuid-2.38.1-h0b41bf4_0
  libxcrypt          conda-forge/linux-64::libxcrypt-4.4.36-hd590300_1
  libzlib            conda-forge/linux-64::libzlib-1.2.13-hd590300_5
  ncurses            conda-forge/linux-64::ncurses-6.4.20240210-h59595ed_0
  openssl            conda-forge/linux-64::openssl-3.2.1-hd590300_1
  pip                conda-forge/noarch::pip-24.0-pyhd8ed1ab_0
  python             conda-forge/linux-64::python-3.9.19-h0755675_0_cpython
  readline           conda-forge/linux-64::readline-8.2-h8228510_1
  setuptools         conda-forge/noarch::setuptools-69.2.0-pyhd8ed1ab_0
  tk                 conda-forge/linux-64::tk-8.6.13-noxft_h4845f30_101
  tzdata             conda-forge/noarch::tzdata-2024a-h0c530f3_0
  wheel              conda-forge/noarch::wheel-0.43.0-pyhd8ed1ab_1
  xz                 conda-forge/linux-64::xz-5.2.6-h166bdaf_0

Proceed ([y]/n)? y
...
username@lanta:~> conda activate myenv
(myenv) username@lanta:~>

Install Jupyter and other packages in the myenv environment

  1. Use the conda install jupyter command to install jupyter in the myenv environment.

  2. If you want to install other packages such as PyTorch, you can use the pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu118 command to install PyTorch in the myenv environment.

Code Block
(myenv) username@lanta:~> conda install jupyter
...
(myenv) username@lanta:~> pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu118
...

Running Jupyter Notebook via ssh tunneling

Example of Slurm script for running Jupyter Notebook on Compute node

Code Block
#!/bin/bash
#SBATCH -p compute                      # Specify partition [Compute/Memory/GPU]
#SBATCH -N 1 -c 128                     # Specify number of nodes and processors per task
#SBATCH --ntasks-per-node=1             # Specify tasks per node
#SBATCH -t 2:00:00                      # Specify maximum time limit (hour: minute: second)
#SBATCH -A ltxxxxxx                     # Specify project name
#SBATCH -J JOBNAME                      # Specify job name

module load Mamba/23.11.0-0             # Load the module that you want to use
conda activate myenv                    # Activate your environment

port=$(shuf -i 6000-9999 -n 1)
USER=$(whoami)
node=$(hostname -s)

# jupyter notebookng instructions to the output file
echo -e "

    Jupyter server is running on: $(hostname)
    Job starts at: $(date)

    Copy/Paste the following command into your local terminal 
    --------------------------------------------------------------------
    ssh -L $port:$node:$port $USER@lanta.nstda.or.th -i id_rsa
    --------------------------------------------------------------------

    Open a browser on your local machine with the following address
    --------------------------------------------------------------------
    http://localhost:${port}/?token=XXXXXXXX (see your token below)
    --------------------------------------------------------------------
    "

# start a cluster instance and launch jupyter server

unset XDG_RUNTIME_DIR
if [ "$SLURM_JOBTMP" != "" ]; then
    export XDG_RUNTIME_DIR=$SLURM_JOBTMP
fi

jupyter notebook --no-browser --port $port --notebook-dir=$(pwd) --ip=$node

Example of Slurm script for running Jupyter Notebook on GPU node

Code Block
#!/bin/bash
#SBATCH -p gpu                          # Specify partition [Compute/Memory/GPU]
#SBATCH -N 1 -c 16                      # Specify number of nodes and processors per task
#SBATCH --gpus-per-task=1               # Specify the number of GPUs
#SBATCH --ntasks-per-node=4             # Specify tasks per node
#SBATCH -t 2:00:00                      # Specify maximum time limit (hour: minute: second)
#SBATCH -A ltxxxxxx                     # Specify project name
#SBATCH -J JOBNAME                      # Specify job name

module load Mamba/23.11.0-0             # Load the module that you want to use
conda activate myenv                    # Activate your environment

port=$(shuf -i 6000-9999 -n 1)
USER=$(whoami)
node=$(hostname -s)

# jupyter notebookng instructions to the output file
echo -e "

    Jupyter server is running on: $(hostname)
    Job starts at: $(date)

    Copy/Paste the following command into your local terminal 
    --------------------------------------------------------------------
    ssh -L $port:$node:$port $USER@lanta.nstda.or.th -i id_rsa
    --------------------------------------------------------------------

    Open a browser on your local machine with the following address
    --------------------------------------------------------------------
    http://localhost:${port}/?token=XXXXXXXX (see your token below)
    --------------------------------------------------------------------
    "

# start a cluster instance and launch jupyter server

unset XDG_RUNTIME_DIR
if [ "$SLURM_JOBTMP" != "" ]; then
    export XDG_RUNTIME_DIR=$SLURM_JOBTMP
fi

jupyter notebook --no-browser --port $port --notebook-dir=$(pwd) --ip=$node

Running Jupyter Notebook with Slurm script

There are 3 steps to run Jupyter Notebook on LANTA HPC.

1. Submit your job and read your slurm-xxxxx.out

Code Block
username@lanta:~> sbatch script.sh
username@lanta:~> cat slurm-xxxxx.out
    Jupyter server is running on: x1001c7s7b0n0
    Job starts at: Thu 28 Mar 2024 11:00:53 PM +07

    Copy/Paste the following command into your local terminal
    --------------------------------------------------------------------
    ssh -L 60151:x1001c7s7b0n0:60151 username@lanta.nstda.or.th -i id_rsa
    --------------------------------------------------------------------

    Open a browser on your local machine with the following address
    --------------------------------------------------------------------
    http://localhost:60151/?token=XXXXXXXX (see your token below)
    --------------------------------------------------------------------

[I 2024-03-28 23:01:07.926 ServerApp] Extension package jupyter_lsp took 0.4361s to import
[I 2024-03-28 23:01:09.498 ServerApp] jupyter_lsp | extension was successfully linked.
[I 2024-03-28 23:01:09.503 ServerApp] jupyter_server_terminals | extension was successfully linked.
[I 2024-03-28 23:01:09.508 ServerApp] jupyterlab | extension was successfully linked.
[I 2024-03-28 23:01:09.534 ServerApp] notebook | extension was successfully linked.
[W 2024-03-28 23:01:12.375 ServerApp] jupyter_nbextensions_configurator | error adding extension (enabled: True): The module 'jupyter_nbextensions_configurator' could not be found (No module named 'jupyter_nbextensions_configurator'). Are you sure the extension is installed?
    Traceback (most recent call last):
      File "/lustrefs/disk/modules/easybuild/software/Mamba/23.11.0-0/envs/tensorflow-2.12.1/lib/python3.10/site-packages/jupyter_server/extension/manager.py", line 322, in add_extension
        extpkg = ExtensionPackage(name=extension_name, enabled=enabled)
      File "/lustrefs/disk/modules/easybuild/software/Mamba/23.11.0-0/envs/tensorflow-2.12.1/lib/python3.10/site-packages/jupyter_server/extension/manager.py", line 186, in __init__
        self._load_metadata()
      File "/lustrefs/disk/modules/easybuild/software/Mamba/23.11.0-0/envs/tensorflow-2.12.1/lib/python3.10/site-packages/jupyter_server/extension/manager.py", line 201, in _load_metadata
        raise ExtensionModuleNotFound(msg) from None
    jupyter_server.extension.utils.ExtensionModuleNotFound: The module 'jupyter_nbextensions_configurator' could not be found (No module named 'jupyter_nbextensions_configurator'). Are you sure the extension is installed?
[I 2024-03-28 23:01:12.393 ServerApp] notebook_shim | extension was successfully linked.
[I 2024-03-28 23:01:12.534 ServerApp] notebook_shim | extension was successfully loaded.
[I 2024-03-28 23:01:12.536 ServerApp] jupyter_lsp | extension was successfully loaded.
[I 2024-03-28 23:01:12.537 ServerApp] jupyter_server_terminals | extension was successfully loaded.
[I 2024-03-28 23:01:12.549 LabApp] JupyterLab extension loaded from /lustrefs/disk/modules/easybuild/software/Mamba/23.11.0-0/envs/tensorflow-2.12.1/lib/python3.10/site-packages/jupyterlab
[I 2024-03-28 23:01:12.549 LabApp] JupyterLab application directory is /lustrefs/disk/modules/easybuild/software/Mamba/23.11.0-0/envs/tensorflow-2.12.1/share/jupyter/lab
[I 2024-03-28 23:01:12.550 LabApp] Extension Manager is 'pypi'.
[I 2024-03-28 23:01:12.599 ServerApp] jupyterlab | extension was successfully loaded.
[I 2024-03-28 23:01:12.605 ServerApp] notebook | extension was successfully loaded.
[I 2024-03-28 23:01:12.605 ServerApp] Serving notebooks from local directory: /home/ywongnon/Jupyter_GPU
[I 2024-03-28 23:01:12.605 ServerApp] Jupyter Server 2.13.0 is running at:
[I 2024-03-28 23:01:12.605 ServerApp] http://x1001c7s7b0n0:60151/tree?token=13acf46197090432de43db8f65d8651361ad319861bd04f5
[I 2024-03-28 23:01:12.605 ServerApp]     http://127.0.0.1:60151/tree?token=13acf46197090432de43db8f65d8651361ad319861bd04f5
[I 2024-03-28 23:01:12.605 ServerApp] Use Control-C to stop this server and shut down all kernels (twice to skip confirmation).
[C 2024-03-28 23:01:12.620 ServerApp]

    To access the server, open this file in a browser:
        file:///lustrefs/disk/home/ywongnon/.local/share/jupyter/runtime/jpserver-25384-open.html
    Or copy and paste one of these URLs:
        http://x1001c7s7b0n0:60151/tree?token=13acf46197090432de43db8f65d8651361ad319861bd04f5
        http://127.0.0.1:60151/tree?token=13acf46197090432de43db8f65d8651361ad319861bd04f5

2. Copy/Paste the following command into your local terminal for ssh tunneling to the LANTA HPC

Code Block
ssh -L 60151:x1001c7s7b0n0:60151 username@lanta.nstda.or.th -i id_rsa

...

Info

If you don’t have a private key (id_rsa file), you can use only the ssh -L 8714:x1000c2s0b0n0:8714 username@lanta.nstda.or.th command to access the LANTA HPC with your password and verification code.

3. Open a browser on your local machine with the following address (Final line in slurm-xxxxx.out) 

Code Block
http://127.0.0.1:60151/tree?token=13acf46197090432de43db8f65d8651361ad319861bd04f5

...

Shutting down the Jupyter Notebook

When you’re done with the Jupyter Notebook session, you can start the shutdown process by closing the browser and terminal on your local machine. Then, you must cancel your job in the Slurm system of the LANTA HPC with the scancel JOBID command.

Code Block
username@lanta:~> scancel xxxxx

...

Related articles

Filter by label (Content by label)
showLabelsfalse
max5
spacescom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@48ae393
showSpacefalse
sortmodified
typepage
reversetrue
labelssingularity python container
cqllabel in ( "jupyter-vir-env" , "jupyter-apptainer" , "env" , "python-script" ) and space = currentSpace ( )